Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers
Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers Wall Mounted Pool Pump Covers

Wall Mounted Pool Pump Covers

Selected style: Wall Mounted (Change style)
Selected Colour: Basalt (Satin) (Change colour)

Colour

Colour: BASALT (Satin)

Depth

Height

Height at rear

Width

Gates

Cost

$----

Please read the Product Description & Recommended Uses sections at the bottom of the page prior to purchase.

Please note that our delivery service is limited to curb side only. Our drivers are unable to drive up driveways, as doing so may result in potential damage. Shipping costs will be added during check out for standard delivery zones.

All measurements above are external, in millimetres, with a manufacturing tolerance of 1-5 mm. For approximate internal clearances, take 40 mm off the wall mounted depth; 60 mm off the free standing depth; 55 mm off the height and 55 mm off the width. Allow for a 45 mm fall on the lid. Click here to learn how to measure

Colours are indicative only due to variations in devices.

 

premium pool pump covers

pool filter cover lifestyle shot pool pump shed lifestyle image Best Pool Pump Covers Features

Pool pump covers are the perfect finishing touch for any outdoor area. Strike the perfect balance between good looks and smart design with a premium aluminium pool pump shed from SlatMe.

Our Australian made Wall Mounted Pool Pump Covers are designed with an open back for attachment onto a structural wall, masonry fence or other solid vertical surface. 

As the higest quality pool equipment covers available on the market, SlatMe offers:

  • An exceptional standard of quality throughout
  • Hinged gates and lids for easy access to your pool equipment
  • Pre-constructed panels for quicker assembly
  • Expertly welded slats and frames for added strength
  • Low maintenance and durable design
  • Genuine Interpon powdercoat in a range of contemporary colours
  • Superior craftsmanship and construction
  • 5 Year Limited Manufacturer's Warranty

For approximate internal clearances, take 40 mm off the wall mounted depth; 55 mm off the height and 55 mm off the width. Allow for a 45 mm fall on the lid.

Lids are designed to open approximately 45 degrees. Please ask for custom gas struts if you need a wider opening.

Please read the Recommended Uses section prior to purchase to confirm if this product is suitable for you. 

We've packed a lot into our DIY kits, including:

  • Pre-contructed aluminium gate and side panels
  • A solid, weather resistant VJ style lid opening to approx. 45 degrees
  • Welded slats, frames and joins throughout
  • Pre-calibrated gas struts for safe and easy lid operation 
  • Quality gate hardware, including a genuine D&D gate latch
  • Colour matched hinges, screws and fixings
  • Detailed instruction sheet with optional phone support
  • 5 Year Limited Manufacturer's Warranty
  • Lids are designed to open approximately 45 degrees. Please ask for custom gas struts if you need a wider opening.
  • For approximate internal clearances, take 40 mm off the depth; 55 mm off the height and 55 mm off the width. Allow for a 45 mm fall on the lid.
  • SlatMe pool pump covers are suitable for covering standard pool filtration systems and pool pumps.
  • Covers are not recommended for heat pumps, air conditioners, or other heat emitting equipment (due to the restricted air flow). Please refer to the FAQs page for more information. 
  • Pool Pump Covers are best installed outside the non-climbable zone of your pool fencing, but installations within the non-climbable zone are possible in certain circumstances, depending on the specific layout of your site, as advised by a local pool safety certifier. 
  • The Wall Mounted Pump Cover must be attached to a wall, masonry fence or a similar solid structure at the rear. 
  • Wall Mounted pool pump sheds are NOT recommended for installations onto a timber or Colorbond fence. Please ask for a modified free standing pool pump cover if required.
  • The front posts must be fixed into a concrete slab or similar footing at the front (contact us to discuss options if you need to install into natural ground).
  • The location of your pool pump cover in relation to your pool fencing must meet the pool safety requirements of your local council. Please confirm your local council pool safety requirements prior to install.
  • Any installations within the non-climbable zone of your pool fencing must have the gates oriented correctly to ensure pool safety compliance. Please ask us for more information if you are unsure. 

Please contact us if you any questions regarding the suitability of this product for your needs.

Our DIY Kits can be assembled within 2 to 4 hours by a tradesman or experienced home handyman. Pre-welded, fully constructed panels save time on the ground, with our detailed instructions and optional phone support also available.

If you (or a clever tradie mate) know your way around a drill; are confident using a masonry drill bit; and are comfortable using metal tek screws with aluminium; it's "Do-It-Yourself" that you can actually do.

Please read the Recommended Uses section to confirm if this product is suitable for your installation site.

Please note that our delivery service is limited to curb side only. Our drivers are unable to drive up driveways, as doing so may result in potential damage. 

All of our pump covers are individually made right here in Australia, with an average turnaround time of approximately 3 – 6 weeks.

Your order will arrive in two separate deliveries – an accessories pack via courier, and your main pump cover kit via truck delivery on a pallet.

Standard flat rate shipping starts from just $100 including GST for select Australian capital cities and surrounding metro areas. Your exact shipping rate will be calculated automatically at checkout. Our products can be shipped throughout most of Australia, including Brisbane, Gold Coast, Newcastle, Sydney, Melbourne, Adelaide, Canberra and Perth. Please contact us to confirm shipping rates outside of these areas.